陶瓷三輥機/MTR-80EMAX 產品特點：

1、高精度研磨(最小間隙可達 1um以下，視物料固有性質而定)High precision grinding (minimum 1um,depend on materials)

2、功率大、可加熱制冷，界面實時顯示流量大小及簡溫度High power, can be heated and cooled, with real-time display offlow rate and roller temperature on the interface

3、工業觸摸屏全電子控制，壓力模式/間隙模式/清洗模式，配置工業4.0接口，帶有壓力監測Industrial touch screen fully electronic control,pressuremode/gapmode/cleaning mode,equipped with Industry4.0 interface,withpressure monitoring

4、全新間隙調節機構，力臂加長，剛性大，不容易撐開New clearance adjustment mechanism, the force arm is lengthened, the rigidity is large, and it is not easy to open

5、全新獨立消隙機構，穩定性高

New independent clearance elimination mechanism, high stability

6、輥間隙可在線修正，后臺配置零位自校準功能The roller gap can be adjusted online,and the background is equipped with zero position self calibration function

7、陶瓷輥精度:同心度<2um、直線度<2um、表面平整度<0.3umCeramic roller accuracy:concentricity<2um,Straightness<2um,Surface flatness<0.3um

8、選配工作安全支架，滿足美標 ANSI B65(Safe Operating Features for Three Roll Mills)Work safety brackets can be optional and meet the American standard ANSl B65

陶瓷三輥機/MTR-80EMAX 參數表：